Serial to Ethernet Connector v.9.0


Share up to 255 peripheral devices remotely with serial over Ethernet technology. Serial to Ethernet Connector is a COM over Ethernet utility that turns your computer into a flexible terminal server. Network-connected users located anywhere in the world can interact with serial devices as if they had a direct local connection to the equipment.

The software creates virtual serial ports that are treated like physical interfaces by the Windows operating system. Virtual serial ports extend the functionality of your computer by providing additional connectivity options. Use serial devices even on computers that do not have any physical COM ports.

Virtual COM ports created by the application fully emulate physical serial interfaces and can be used in the same way with applications or devices. Serial to Ethernet Connector forwards data transmitted through your system’s real or virtual serial ports over a TCP/IP network such as a LAN, WAN, VPN or the Internet. This ability lets you share valuable serial peripheral devices with remote users across the office or in another country. The only requirement is that the users have access to the same IP network.

A new and more intuitive user interface makes it simple to share your serial interface for incoming connections. You can also share ports using UDP connections or attach a port to a remote host.

Serial to Ethernet Connector is a great way to increase the value of your organization’s serial peripheral devices. Rather than swapping cables or purchasing duplicate equipment, all devices can be shared with any network-connected machine.

Once a port is shared, devices can be unplugged and reconnected without restarting the application. The application’s virtual ports let you interact with many more devices simultaneously than could be accomplished with a computer’s physical ports or a hardware hub. Make the most of your serial devices with Serial to Ethernet Connector.

A great way to redirect RS232 over Ethernet. Serial to Ethernet Connector enables you to share serial ports and devices over a network. Use your computer as a cost-effective terminal server by sharing up to 255 serial devices simultaneously. Remotely connect any network-attached serial device.

serial over ethernet, rs232 over ethernet, com over ethernet, share serial port over ip network, serial over internet

  • Serial to Ethernet Connector
  • 9.0
  • 12 Apr 23
  • Electronic Team, Inc.
  • Windows 7, 8, 8.1, 10, 11 (32, 64-bit), Windows Server 2012, 2016, 2019, 2022, Windows 10, 11 on ARM
  • Shareware
  • 5.32 Mb
  • 1964
  • $259.95
Latest Versions History
Version Date Released Release Notes
9.0 12.04.2023 Added: new software drivers signed by Microsoft; color indication that the maximum number of client connections allowed for a remote server has been reached. Improved: Spanish, French, and German localizations. Fixed: compatibility issues with 12th Gen Intel® Core⢠processors; issues with displaying long port names; Lots of minor fixes and improvements.
8.0 01.06.2020 Added: a new improved user interface. Added: the list of remote connections available on the network. Added: the ability to pause active network connections. Added: the ability to break a specific connection. Added: the ability to reset the connection statistics. Discontinued: support for Windows XP, Windows Vista, Windows 2003, and Windows 2008 and Windows 7 versions. Serial to Ethernet Connector versions for Windows 7 SP1 and Windows 2008 R2 SP1 are still supported. Added: the menu âFor developersâ with the options to open the OEM user manual, view code samples, and generate the OEM Redistribution Package. (In the OEM version only.)
7.0 25.05.2016 Added: a redesigned interface; the ability to export/import the connections configuration (from the GUI as well as the command line); the ability to set the size of the buffer or disable buffering altogether. Improved: performance when creating multiple virtual COM ports at a time, conditional data sending: you can now specify multiple conditions; the âSend data when received char with codeâ condition now accepts characters with ASCII codes above 127; on removing a connection, the virtual COM port is now deleted even when opened. Fixed: an issue where the GUI failed to connect to the service after reopening; incorrect behavior of strict baud rate emulation; some activation issues; a crash of the service on attempt to create a virtual COM port with a long name; a condition where a client connection set to communicate with a large number of servers could disappear after a reboot; a crash of the GUI on attempt to send a mirror request; a condition where a server would sometimes start listening for connections when not supposed to (i.e. when configured to start listening only when the COM port is opened, and the port was closed); the service could become unresponsive on startup on some older processors; with delayed sending enabled, the data could get split across multiple network packets; the âBreak connection if no activityâ option was not functional; a break signal from a device was not transmitted when using the Telnet protocol; a few minor bugs related to flow control negotiation.
6.1 07.02.2014 Added: Windows 8.1 and Windows Server 2012 R2 support; Improved: data transfer when sharing fax machines; Fixed: incorrect manual reactivation in case there was no Internet connection; SEC service failure when trying to successively delete multiple connections ...

Review Serial to Ethernet Connector

  • captcha

Other software of Electronic Team, Inc.
  • Donglify  v.1.0.12Dongle sharing software Donglify. Find out how to share and get access to your USB dongle from any remote location across the Internet. Donglify is a professional utility for HASP key sharing ...
  • Elmedia Player  v.8.2Elmedia Player - a versatile, free media player for Mac - supports almost all commonly used video & audio formats. This app offers an extensive list of flexible settings for video viewing and streaming to Apple TV, Smart TV or Chromecast.
  • FlexiHub  v.4.0FlexiHub is a versatile software solution that allows you to access and manage USB and COM port devices remotely over Ethernet. It functions as a control panel for numerous ports and devices connected to the computers in the network.

New Network software
  • Serial to Ethernet Connector  v.9.0Serial to Ethernet Connector enables you to share serial ports and devices over a network. Use your computer as a cost-effective terminal server by sharing up to 255 serial devices simultaneously. Remotely connect any network-attached serial device.
  • Slitheris Network Discovery  v.1.1.310Slitheris Network Discovery is a new network tool from Komodo Labs that provides world-class ipscans with a simple, easy-to-use interface.
  • Total Network Inventory  v.6.0.0Total Network Inventory will scan your entire network, query all servers, workstations and appliances discovered, and record important information about every piece of equipment. A perfect inventory without leaving a chair.
  • NEWT Professional Network Inventory  v.2.5.369Network scan all machines using NEWT Professional network inventory. Gather important information without ever having to visit a remote PC in just minutes!
  • Send It Here!  v.1.0The Windows Send To menu is something everyone has but is seldom used because of its extremely limited function. Few software authors install a shortcut there and it seems like the ones that do are virtually useless shortcuts ...
  • Drag Drop and Replace  v.1.0Drag Drop and Replace is a rapid text search and replace utility. Extremely easy to use and user friendly. Features include preview as well as support of files of up to 4 gigabytes in size.