Loadcalc 2008 Panel Schedule Trial v.2.4

Advertisement
Advertisement

Loadcalc 2008 performs panel schedules and service and feeder load calculations for commercial occupancies and single family dwellings. It also prints panelboard directories in two sizes (4x6 inch and 6x8 inch) for inside the panelboard doors or covers. The 2008 National Electrical Code is fully supported. Panel Schedules: Single or three phase. Commercial or residential. Load calculations and demand factoring according to occupancy type. Service/feeder load calculations for single dwelling units Standard Calculation Method (NEC Article 220), Optional Calculation Method (NEC Article 220-30), and Additional Loads in Existing Dwelling Units Calculation Method (NEC Article 220-31). Calculates net computed load in VA and amperes, and calculates the total service entrance load. Panelboard Directories: Prints directories for the inside of panelboard doors. Standard Calculation Method Demand Factoring: General Lighting, Small Appliance and Laundry Loads. Cooktop, Range, Wall Oven. Fixed Appliances. Largest Motor Load. Optional Calculation Method Demand factoring of other loads as per NEC 220-30. Allows input of heating system type as per NEC Table 220-30, automatically determines the larger of heating or cooling load. Additional Loads In Existing Dwelling Units Load calculations for existing dwelling units presently served by a 120/240 volt or 120/208Y service. Quick Reference Tables From The 2008 NEC Can be viewed on screen or printed. File Save/Load Save individual data files for later recall. Specify default data directory Input up to four lines of data which will print at the top of your report. Print Preview & Printed Reports Print preview screens show reports as they will print. Professional, detailed printed reports.System Requirements: Windows 95 or higher, 4Mb memory, 4 Mb disk spaceEnhancements: Minor bug fixes

Loadcalc 2008 performs panel schedules and ...

electrical, contracting, engineering, architecture, design, calculations, national, code, wire, motor, transformer, panel, voltage, current, fault current, box, lighting, conduit, reports, calculator

 
  • Loadcalc 2008 Panel Schedule Trial
  • 2.4
  • Robert LaCapra
  • Win2000, Win7 x32, Win7 x64, Win98, WinVista, WinV
  • Demo
  • 707 Kb
  • 515
  • $129.95
 
 

Review Loadcalc 2008 Panel Schedule Trial

  • captcha
 

Other software of Robert LaCapra
  • Electrc 2005  v.2.3Electrc 2005 2.3 is a powerful and popular utility which is designed for electrical contractors, engineers, inspectors, estimators, and electrical maintenance personnel.It performs wire sizing, conduit fill, motor, lighting, panel schedule, ...
  • Electrc 2005 NEC Calculator Trial Versio  v.1.1.1Electrc 2005 performs many electrical contracting and engineering calculations in complete conformance with the 2005 National Electrical Code (NEC). It produces detailed professional printouts as well as on-screen details. Many NEC parameters.
  • Electrc 2008 NEC Calculator  v.2.1Electrc 2008 is designed for electrical contractors, engineers, inspectors, estimators, and electrical maintenance personnel. It performs wire sizing, conduit fill, motor, lighting, panel schedule, transformer, voltage drop, box fill, fault current, ...

New Project Management software
  • MindView  v.8.0.24346MindView is a professional mind mapping software that allows you to visually brainstorm, organize and present ideas. With powerful MS Office integration, project management features and collaboration options, MindView has become the industry leader.
  • RationalPlan Single Project for Mac  v.5.7RationalPlan Single Project is a project management software covering the project management areas starting with WBS construction, project planning and scheduling to critical path management, overallocated resources detection, progress tracking etc.
  • RationalPlan Single Project  v.5.7RationalPlan Single Project is a project management software covering the project management areas starting with WBS construction, project planning and scheduling to critical path management etc ...
  • BuilderSYS  v.1.0.34.04/06Free Contractor Software est.1989 | TAKEOFF & MEASURING: PDF/CAD length, objects, areas, volume | ESTIMATING: bill of materials/abstract estimate, orders | JOBS MANAGEMENT: documents, claims++ | PROJECT MANAGEMENT/AUTOMATION: Premium option | ...
  • Loadcalc 2008 Panel Schedule  v.1.2.0Loadcalc 2008 performs panel schedules and service and feeder load calculations for commercial occupancies and single family dwellings. It also prints panelboard directories in two sizes (4x6 inch and 6x8 inch) for inside the panelboard doors or ...
  • LoadeaTest  v.0.6.2Stress tests aim at testing the functionalities of a system when this system is heavily loaded for a given period of time or at peak time. The main goal of the test is to determine if the system is able to meet target availability (response time for ...