Windows XP Home Edition Utility: Setup Disks for Floppy Boot Install v.310994

Advertisement
Advertisement

The Windows XP startup disk allows computers without a bootable CD-ROM to perform a new installation of the operating system. The Windows XP startup disk will automatically load the correct drivers to gain access to the CD-ROM drive and start a new installation of Setup.The Windows XP startup disk allows computers without a bootable CD-ROM to perform a new installation of the operating system. The Windows XP startup disk will automatically load the correct drivers to gain access to the CD-ROM drive and start a new installation of Setup. You cannot upgrade from a Windows XP startup disk.Windows XP Home Edition startup disks will not work for Windows XP Professional installations and vice-versa.Windows XP Setup boot disks are available only by download from Microsoft. The Setup boot disks are available so that you can run Setup on computers that do not support a bootable CD-ROM.If your computer does support booting from a CD-ROM, or if network-based installation is available, Microsoft recommends that you use those installations methods instead.Future products will no longer support installation via the setup boot disks. Installation of future Microsoft Operating Systems will require the ability to boot from the CD or PXE boot from Network. Setup boot disks that are provided for Windows XP are provided and supported on an as is basis.System Requirements * Supported Operating Systems: Windows 2000; Windows 95; Windows 98; Windows ME; Windows NT; Windows XP * Any x86 compatible system that meets the requirements for installing Microsoft Windows XP Home EditionInstructions 1. Click the Download button on this page to start the download, or choose a different language from the drop-down list and click Go. 2. Do one of the following: * To start the installation immediately, click Open or Run this program from its current location. o NOTE: The installation program will prompt you to provide formatted, 1.44MB floppy disks onto which the installation program will copy its files. * To copy the download to your computer for installation at a later time, click Save and choose a location on your hard disk for saving the file.Additional InformationThere are six Windows XP Setup boot floppy disks. These disks contain the files and drivers that are required to access the CD-ROM drive and begin the Setup process.Creating the Setup DisksWhen you download the Setup disks, the download contains only one large program file. When you run the downloaded file, it extracts the files. You receive the following prompt: This program creates the Setup boot disks for Microsoft Windows XP. To create these disks, you need to provide 6 blank, formatted, high-density disks.Specify the Floppy Drive to Copy the Images ToType the drive letter for the floppy disk drive (this is typically drive A). After you type the floppy disk drive letter, you see the following prompt:Insert one of these disks into drive drive letter :. This disk will become the Windows XP Setup Boot Disk.Press any key when you are ready.When you press a key, the downloaded file starts extracting and copying the files. Continue inserting the blank disks as you are prompted to do so until all six disks are created. If the process is interrupted you must run the downloaded program file again to create all six disks.Make sure to label each disk appropriately with the number that is specified by the program. You will have to use the disks in the correct order during the Setup process.Using the Setup DisksAfter you create all six disks, insert the first disk in the floppy disk drive, and then restart the computer. Note that the computer must be configured to boot from the floppy disk drive. In some cases, you may need to modify your computer's BIOS settings to do this.The Setup process starts. Insert the other floppy disks as you are prompted to do so. Note that you will need to use the Windows XP CD-ROM to finish Setup.

The Windows XP startup disk allows computers ...

windows, installation, startup, correct, access, drive, setup, automatically, system, operating, computers, home, disks, floppy, boot, disk, rom

 
  • Windows XP Home Edition Utility: Setup Disks for Floppy Boot Install
  • 310994
  • Microsoft Corporation.
  • WinNT 4.x, WinNT 3.x, WinME, Win2003, Win2000, Win98, Win95
  • Freeware
  • 4.18 Mb
  • 1805
  • Free
 
 

Review Windows XP Home Edition Utility: Setup Disks for Floppy Boot Install

  • captcha
 

Other software of Microsoft Corporation.

New File Management software
  • FileList  v.4.0FileList is a command line utility that produces a list of files of the given path in CSV format, which can be imported into a spreadsheet or database. The list includes the file name, size, path, last access and change date, etc.
  • Extra Subst  v.5.5Extra Subst - program designed to make access to frequently used folders of your computer easier. It is also used to create, edit and remove virtual drives of your computer.
  • Guiffy eXpert Windows  v.11.7Guiffy is a visual file compare diff tool, folder compare, and merge tool. Guiffy is a cross-platform application and component available for Windows, MacOS, Linux, and Unix platforms. This download includes an easy-to-use Windows installer.
  • EF AutoSync  v.2.80EF AutoSync is a practical tool for automatic data synchronization between the PC and other components such as USB flash drives, external hard drives, another computer, etc. Multilingual. Shareware ...
  • Hardware ID Extractor  v.1.0.1The Hardware ID Extractor is a Microsoft Windows program that shows data about your computer's hardware: ...
  • PWL Tools  v.6.0.1509Using Pwl Tools you can view PWL files, recover lost login passwords and more.