W.A.L.T.E.R. - Autonomous Robot v.1.0

Source control for software I am writing for W.A.L.T.E.R., my experimental robot. It's a two wheeled differential drive robot with 4 decks and a top front mounted manipulator arm.

Source control for software I am writing for ...

 
  • W.A.L.T.E.R. - Autonomous Robot
  • 1.0
  • Dale Weber
  • Windows
  • Freeware
  • 132
  • Free
 
 

Review W.A.L.T.E.R. - Autonomous Robot

  • captcha
 
 
New Science software
  • Photovoltaic System  v.3.00Simulate the amortization of a Photovoltaic System over 30 years, including Prosumer Electricity Network Trading. Fine-tune as many cost-driving, efficiency, and sales parameters as you want. See Total Amortization, Net Profit and ROI over 30 years.
  • SO-Sieve  v.1.0.6651.3"SO-Sieve" having a user-friendly interface, includes sieve analysis, hydrometer and Atterberg limits tests. It also presents soil type based on USCS (Unified Soil Classification System). Lots of smart capabilities included! More info on our website ...
  • Intuwiz CNC  v.1.04Intuwiz CNC can convert any personal computer with LPT (parallel) port into computer numerical control (CNC) system.Program can generate step/direction or direct phase outputs using RS-274D G-code (Gcode).Application allows to use E-Stop.
  • Intuwiz G-code Generator  v.1.11Intuwiz G-code Generator is a toolpath generator for CNC machining.Program can generate a G-Code toolpath for a various geometric shapes (triangle, rectangle, circle, half circle, quarter-circle, parallelogram, rhombus, trapezoid, hexagon and etc).
  • VirtBotics  v.1.0This is an Robot Learning Environment consisting a full robot operating system and a simulator which run the system. It is geared for use to learning robotics concepts in cases where real hardware is not available.
  • Wall-E Autonomous Robot  v.1.0I started this project to build an open source robot. i found a manual to build a wall-e robot, but the code is missing. i build my wall-e with this module Arduino Duemilanove. This is also an open source module.