SO-Sieve v.1.0.6651.3

Advertisement
Advertisement

"SO-Sieve" having a user-friendly interface, includes sieve analysis, hydrometer and Atterberg limits tests. It also presents soil type based on USCS (Unified Soil Classification System).
Sieve analysis and Atterberg limits may either be determined by test results or visual examination. Hydrometer test can be calculated using both ASTM D7928 and ASTM D422 (withdrawn 2016) standards. Note that sieve analysis and hydrometer tests could randomly be generated based on user-defined criteria.

Features
General features
- User is informed about the common ranges regarding input parameters.
- Software outputs are exported in both landscape and portrait formats.
- Test data and corresponding calculations are presented in a separate format.
- Blank laboratory data sheets may be used for test data input.
Sieve analysis
- Visual examination may be used for the determination of particle-size distribution.
- Random generation of sample sieve analysis tests based on user-defined criteria.
- Test data can be edited using either graph or input table.
Hydrometer test
- Random generation of sample hydrometer tests based on user-defined criteria.
- Hydrometer calculation using ASTM D7928:
* Control cylinder correction: Correction value is measured using a control cylinder after each of the test readings.
* Calibration relationship: is defined and automatically applied.
- Hydrometer calculation using ASTM D422:
* Normal correction: Separate corrections are applied for the effect of temperature and dispersing agent. Temperature correction may be automatic or manually assigned by the user.
* Composite correction: is measured at two temperatures and corrections for other temperatures are calculated by the use of linear interpolation.
Atterberg limits tests
- Visual examination may be used for the determination of soil type according to plasticity chart.
- User is warned when ASTM D4318 regulations are not satisfied.

More information on our website ...

Sieve analysis, Hydrometer & Atterberg limits. "SO-Sieve" having a user-friendly interface, includes sieve analysis, hydrometer and Atterberg limits tests. It also presents soil type based on USCS (Unified Soil Classification System). Lots of smart capabilities included! More info on our website ...

software, program, geotechnical engineering, soil-sieve analysis, atterberg limits, liquid limit, plastic limit, plasticity index, laboratory test, soil mechanics, report, data sheet, landscape, portrait, smart, uscs, generation

 
  • Shareware
  • 13.23 Mb
  • 212
  • $125.00
 
 
Latest Versions History
Version Date Released Release Notes
1.0.6651.3 21.03.2018 This is a new release
 
 

Review SO-Sieve

  • captcha
 

Other software of Soil Office Software Group
  • SO-Foundation  v.2.0.509SO-Foundation calculates bearing capacity of shallow foundations by the use of various methods considering both shear failure and settlement. Fully detailed reports are also presented. You may visit our website for more information.
  • SO-Log  v.1.2.6462.0"SO-Log" generates boring logs as a means to summarize and report several tests performed within a geotechnical engineering project. Lots of smart capabilities and a variety of output templates! You may visit our website for more information ...

New Science software
  • Photovoltaic System  v.3.00Simulate the amortization of a Photovoltaic System over 30 years, including Prosumer Electricity Network Trading. Fine-tune as many cost-driving, efficiency, and sales parameters as you want. See Total Amortization, Net Profit and ROI over 30 years.
  • SO-Sieve  v.1.0.6651.3"SO-Sieve" having a user-friendly interface, includes sieve analysis, hydrometer and Atterberg limits tests. It also presents soil type based on USCS (Unified Soil Classification System). Lots of smart capabilities included! More info on our website ...
  • Intuwiz CNC  v.1.04Intuwiz CNC can convert any personal computer with LPT (parallel) port into computer numerical control (CNC) system.Program can generate step/direction or direct phase outputs using RS-274D G-code (Gcode).Application allows to use E-Stop.
  • Intuwiz G-code Generator  v.1.11Intuwiz G-code Generator is a toolpath generator for CNC machining.Program can generate a G-Code toolpath for a various geometric shapes (triangle, rectangle, circle, half circle, quarter-circle, parallelogram, rhombus, trapezoid, hexagon and etc).
  • IW Random Number Generator  v.2.18Random Number Generator is a application designed to generate random numbers.
  • EXDXF-Pro4 for Win  v.4.530EXDXF-Pro4 is a functional dxf converting plugin for Adobe Illustrator which has been loved by professional designers across the world. EXDXF-Pro4 exports CAD-standard dxf to Illustrator data and imports dxf to Illustrator in great quality.