MITCalc Spur Gear Calculation v.1.24

Advertisement
Advertisement

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS

Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:

- Calculation of helical and straight toothing.

- Automatic design of a transmission with the minimum number of input requirements.

- Design for entered coefficients of safety (static, dynamic).

- Calculation of complete geometric parameters (including corrected toothing).

- Optimization of toothing by use of proper correction (balancing specific slips, miminizing specific slips, strength...).

- Calculation of strength parameters, safety check.

- Design of gearing for exact axis distance.

- Complete calculation of tolerances in accordance with ISO 1328 (ANSI/AGMA 2015-1-A01)

- Simple defining of the new materials according ISO 6336-5 (ANSI/AGMA 2001--D04)

- Comprehensive theoretical part in the documentation.

- Supplementary calculations (calculation of parameters of the existing gear, temperature rise, design of shafts, check dimensions).

- Drawings of an accurate tooth shape including data (X,Y coordinates).

- Support of 2D and 3D CAD systems. (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, BricsCAD, ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo).

The calculations use procedures, algorithms and data from standards ANSI, ISO, DIN, BS and specialized literature.

Used standards: ISO 6336-1:2006; ISO 6336-2:2006; ISO 6336-3:2006; ISO 6336-5:2006, ISO 1265; ISO 1328-1:1997; ISO 1328-2:1997; ISO 1122-1:1998, ANSI/AGMA 2001-D04 , AGMA 908-B89, ANSI/AGMA 2015- 1-A01, ANSI/AGMA 2015-2-A06

This module is a standalone part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.

Design and strength check of spur gear. Geometric design and strength check of spur gear with straight and helical toothing. Application supports Imperial and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems.

gearing, spur gear, gear, tooth, toothing, design, strength check, helical, tolerances, material, iso6336 2006, iso1265, iso1328, iso1122, din3990, ansi agma 2001-d04, agma 908-b89, ansi agma 2015-1-a01, ansi agma 2015-2-a06, dxf

 
  • MITCalc Spur Gear Calculation
  • 1.24
  • 11 Jul 17
  • MITCalc
  • Win2000, WinXP, Win7 x32, Win7 x64, Windows 8, Windows 10, WinServer, WinOther, Windows2000, Windows2003, Windows Server 2012, Windows Tablet PC Edition 2005, Windows Media Center Edition 2005, WinVista, Windows Vista, WinVista x64
  • Shareware
  • 4.72 Mb
  • 283
  • $44.00
 
 
Latest Versions History
Version Date Released Release Notes
1.24 11.07.2017 Complete implementation of standards ISO 6336:2006, ISO 1265, ISO 1328:1997, ISO 1122, ANSI/AGMA 2001-D04, AGMA 908-B89, ANSI/AGMA 2015-1-A01, A06. Extended by a whole range of tools that make designing, dimension checking, tolerance proposals and defining of the new materials simpler.
 
 

Review MITCalc Spur Gear Calculation

  • captcha
 

Other software of MITCalc
  • MITCalc  v.1.73MITCalc is a multi-language calculation package includes solutions for gearing, belt, springs, beam, shaft, tolerances and many others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international standards ANSI, ISO, EN...
  • MITCalc - Beam  v.1.17MITCalc-Beam is created for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the ...
  • MITCalc - Beam Calculation  v.1.17The application is designed for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves ...

New Science software
  • Photovoltaic System  v.3.00Simulate the amortization of a Photovoltaic System over 30 years, including Prosumer Electricity Network Trading. Fine-tune as many cost-driving, efficiency, and sales parameters as you want. See Total Amortization, Net Profit and ROI over 30 years.
  • SO-Sieve  v.1.0.6651.3"SO-Sieve" having a user-friendly interface, includes sieve analysis, hydrometer and Atterberg limits tests. It also presents soil type based on USCS (Unified Soil Classification System). Lots of smart capabilities included! More info on our website ...
  • Intuwiz CNC  v.1.04Intuwiz CNC can convert any personal computer with LPT (parallel) port into computer numerical control (CNC) system.Program can generate step/direction or direct phase outputs using RS-274D G-code (Gcode).Application allows to use E-Stop.
  • Intuwiz G-code Generator  v.1.11Intuwiz G-code Generator is a toolpath generator for CNC machining.Program can generate a G-Code toolpath for a various geometric shapes (triangle, rectangle, circle, half circle, quarter-circle, parallelogram, rhombus, trapezoid, hexagon and etc).
  • MITCalc Welded connections  v.1.15The calculation is intended for the geometrical design and strength control of statically loaded welded connections. Application supports Imperial and Metric units and is based on ANSI, ISO, DIN standards.
  • Cheewoo VaryTable  v.2.4.1002.1005Converting text table in the DXF, DWG drawing to cell type CSV, XLS file. Supporting text table converting method options for best converting result. Reading DXF, DWG file directly without external program and save result as a cell type CSV XLS file.